Roller Shutters

Roller shutters are great solution to secure your home or business. They are highly customisable to suit the specific needs and requirements of your premises. Please see all options available.

Category:

Description

Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows.

Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows.

 

Top mounted TL1000® shutter
TL1000 is one of the better shutter systems that can be used in newly-built facilities and those being modernized. The access cover is installed on the bottom of the box – it also allows the possibility of building up the box of shutters from the inside of the apartment without concern about the service access to the shutters. They can be installed to windows whose frame’s max. thickness does not exceed 95 mm. TL1000 shutters have no version with a mosquito net.

 


Top mounted CC1000® shutter
CC1000 – a basic system of overhead shutters. The access cover is installed on the front of the box. They can be installed to windows whose frame’s max. thickness does not exceed 95 mm. There is no version with a mosquito net. CC1000 shutters are an ideal solution for industrial facilities.

 

TP1000K is a system that can be installed on broad window frames, even up to 188 mm (with a broadening up to 250 mm). Using an expanding element we increase the depth of the box by 31 mm or 62 mm. This system has the capability of creating a revision cover from the bottom (with an installation box from the inside), or the front (during the installation on a wide window frame). The possible service is both manual – with the use of a belt – and electric – with the use of a switch or a remote control. The version with a mosquito net protects the room effectively against the access of insects, as well as any kinds of pollen, leaves and dirt. At the same time it does not limit access to air and daylight.

TP1000K is a system that can be installed on wide window frames, even up to 202 mm (with broadening to 264 mm). Using an expanding element we increase the depth of the box by 31 mm or 62 mm. This system has the capability of creating a revision cover from the bottom (with a build-up box from the inside), or the front (during the installation on a wide window frame). The possible service is both manual – with the use of a belt – and electric – with the use of a switch or a remote control. It has two-chamber load carrying walls that provide better thermal insulation and their high stiffness makes it impossible to bend the box during the installation.

 

The front mounted shutter may be installed at any moment, as it is installed on the facade. A large selection of boxes, profiles and their colours will fulfil all your aesthetic expectations. We also offer perfect quality overload, radio and wire drives that will ensure the comfort of use.

Our front mounted shutters perfectly insulate the heat. They are a barrier for unwanted guests, and after a partial lowering they perfectly protect the rooms against excessive sunlight and heating. In all of the top mounted shutter systems that we offer there are also versions with a mosquito net, protecting us against intrusive insects, particularly during the summer months.

 

The shutter in the box cut at an angle of 45 degrees, installed mainly on existing windows or facades. These types of systems are the simplest solutions in technical and economic terms. The size of the box depends on the whole height of the shutter and the type of armouring. This often determines the selection of the method of installation. The lowered shutter is an additional closing of the hole of the building and is at the same time a barrier with insulation properties. The stiff polyurethane foam, filling the profiles, is an additional thermal insulation. The layer of air created between the lowered armour of the shutter and the window or door makes it difficult to exchange heat between the interior and external environments. It enables saving thermal energy necessary for the heating of the rooms, while on hot days it protects against their excessive heating. There are versions with or without mosquito nets.

 

The shutter in the box cut at an angle of 45 degrees is installed mainly on existing windows or facades. The version with a mosquito net effectively protects the room against insects, as well as any kinds of pollen, leaves and dirt. At the same time it does not limit access to air and daylight.

 

 

 

The RL2000 shutter is nothing else than the ST2000 shutter in an oval box. Similarly to its predecessor it constitutes the simplest solution in technical and economic terms, at the same time preserving an interesting style. The size of the box depends on the whole height of the shutter and the type of armouring. There is a version without mosquito nets and another one with mosquito nets.

 

 

 

The semi-circular shapes of the shutter will give the window an elegant appearance. There are also available semi-circular caps for the guide rails. The size of the box depends on the whole height of the shutter and the type of armouring. There are versions with or without mosquito nets.

 

 

THE EXTRUDED BOX made in the technology of pressing aluminium.

Elegance and harmony in combination at an affordable price. It constitutes the simplest solution in technical and economic terms, at the same time preserving an interesting style. The size of the box depends on the whole height of the shutter and the type of armouring. There are also available semi-circular caps for the guide rails. The version with a mosquito net effectively protects the room against insects, as well as any kinds of pollen, leaves and dirt. At the same time it does not limit access to air and daylight.

 

This system is a connection of the front mounted shutter with a top mounted shutter. The basic advantage of this system is the fact that it can be installed without enlarging the window holes and at the same time build up the box, as a result of which we would not reach a visual effect, as in the case of top mounted shutters. With a shutter of this type the whole box remains outside the building and service access is ensured through a revision cover in the lower part. There are versions with or without mosquito nets.